Supply chain decisions

Explore the decisions behind your supply chain.

Loading the map…

100%

Supplier

Which sources can meet demand at an acceptable cost and level of dependency?

Supplier selection

Example question
A new supplier quotes 12% below our current one. How would our total cost change once freight and duties are added, and how much more stock would its longer lead time tie up?
You bringSCMotif calculatesYou get
You bring
purchase prices, freight rates and duties for each sourcing option, plus lead times, minimum order quantities and supplier capacities.
SCMotif calculates
the landed cost of each option, the stock its lead time and minimum order quantity tie up, and how much demand its capacity can cover.
You get
the total cost of each sourcing option compared with today, including the cost of the stock it ties up, and whether it can cover demand.

Supplier diversification

Example question
70% of a key component comes from suppliers in one country. What would it cost to cap that at 40%, and how would each sourcing split hold up if that country dropped out?
You bringSCMotif calculatesYou get
You bring
your suppliers with their countries, prices and capacities, plus freight and duties per route. For suppliers you have not qualified yet, assumed prices and capacities.
SCMotif calculates
one scenario per sourcing split, such as 55% or 40% of demand from the main country, with the volume from the alternative suppliers set and the cheapest plan for the rest of the network around it. Each scenario runs again with the main country’s suppliers removed.
You get
the cost of each sourcing split compared with today and, for each split, the extra cost and uncovered demand if the country drops out.

Production

Where should each product be made, with which inputs and how much capacity?

Production allocation & capacity

Example question
Demand for one product line will grow 25% by 2028. Do we expand plant A, add a shift at plant B, or move volume between plants and pay the extra freight?
You bringSCMotif calculatesYou get
You bring
plants with capacity per line and production cost per unit, demand by region and period, and freight rates. For each expansion option, its assumed capacity and running cost.
SCMotif calculates
one scenario per option, each allocating volumes across plants and lines for every period, together with the flows to customers.
You get
each option’s annual production and freight cost, and the capacity gaps it leaves, so you can set the difference against the investment it needs. Daily scheduling and sequencing stay outside the model.

Make-or-buy

Example question
A contract manufacturer offers to take over our smallest product line. How would our total cost change, and what could the capacity it frees in our plant be used for?
You bringSCMotif calculatesYou get
You bring
the supplier’s price and freight, the internal costs that would go away (you decide which), one-off transition costs and your plant capacities.
SCMotif calculates
the network with and without in-house production of that line, and how the freed capacity is used for your other products.
You get
the change in total cost, how much capacity is freed and what it is used for, and how much volume would then depend on the external supplier.

Warehouses

Which warehouses should serve which customers, and which flows need a hub?

Warehouse footprint

Example question
Our volumes have moved south over the last five years. How would network cost and delivery coverage change if we closed one of our four warehouses, or opened one closer to the growth?
You bringSCMotif calculatesYou get
You bring
your sites, demand by customer or region, and current lane and handling costs. Assumed rates for lanes you do not run today, and site fixed costs and one-off closure costs if you have them.
SCMotif calculates
one footprint scenario per option and assigns every customer flow across the whole network in each.
You get
network cost and delivery coverage per scenario, compared with today. Without site fixed costs the result is a threshold: a closure pays if the site’s avoidable annual cost exceeds the cost it adds elsewhere.

Hub vs. direct delivery

Example question
Today every delivery runs through our two hubs. Which flows would the network send direct instead, and how would transport and handling cost change?
You bringSCMotif calculatesYou get
You bring
your sites, today’s routing of each flow, volumes, and current lane and handling costs. For direct lanes you do not run today, rates from tenders or assumptions, plus full-truck assumptions and any lanes to exclude.
SCMotif calculates
a costed baseline of today’s routing, then a plan that assigns all flows together. Moving one flow off a hub changes how full the trucks on the other lanes are and how the hub’s fixed cost spreads over what remains.
You get
the flows that move between hub and direct, and each scenario’s transport and handling cost compared with the baseline.

See it in the product tour (demo data) →

Transport

How should products move when cost, capacity and service requirements compete?

Flow paths & volumes

Example question
We tender our transport next spring. How much volume should each lane carry in the cheapest network plan?
You bringSCMotif calculatesYou get
You bring
your sites, volumes per period, current rates or tender assumptions per lane, and capacity limits where you know them.
SCMotif calculates
one flow plan for the whole network per period, assigning volume to every lane together.
You get
the volume per lane to take into the tender and the network cost of the plan. Vehicle routing and stop sequences stay outside the model.

FTL vs. LTL

Example question
Most of our deliveries go as part loads. If we combined orders into fewer, fuller trucks, how would transport cost and delivery frequency change across the network?
You bringSCMotif calculatesYou get
You bring
volumes per lane and period or your shipment history, FTL and LTL tariffs or rough rates estimated from past shipments, truck capacities, and how long an order may wait to be combined.
SCMotif calculates
FTL or LTL for every flow, deciding together which volumes are combined across the network.
You get
the cost, truck fill and delivery frequency of each plan compared with today.

Customer

Which customers and service promises drive the cost of your network?

Cost-to-serve analysis

Example question
What does it cost us to serve each customer, and which customers and products still earn a margin once logistics is counted?
You bringSCMotif calculatesYou get
You bring
today’s flows with their costs, supply and handling costs, and revenue per customer and product.
SCMotif calculates
the allocation of every cost in the scenario to the customers and products that cause it, by cost type such as transport, supply and handling. Costs that belong to no single customer are shown separately, so all figures add up to your total.
You get
the cost to serve each customer and product, broken down by cost type, against its revenue.

Service level cost

Example question
Today about 80% of our customers get next-day delivery. What would it cost to offer it to 95%?
You bringSCMotif calculatesYou get
You bring
your sites, customer demand, and lanes with costs and transit times from each warehouse to each customer. Site fixed costs if opening a site is an option.
SCMotif calculates
one scenario per service level, such as 80%, 90% and 95% of demand delivered within the promised time from its serving warehouse, each re-planning every flow in the network around that requirement.
You get
network cost per service level compared with today, and which customers would be served from a different warehouse to meet it.

Port

How do international sourcing and transport choices change landed cost and delivery time?

Tariff & landed-cost scenarios

Example question
If duties on imports from one of our sourcing countries rose to 25%, how would our landed cost change, and would it pay to source or route that volume differently?
You bringSCMotif calculatesYou get
You bring
sourcing options and routes with prices and freight, and the duty rates and origin rules you want to test. SCMotif does not look up tariff schedules.
SCMotif calculates
one scenario per duty assumption, each re-planning sourcing and routing across the network.
You get
landed cost per scenario compared with today, and which volumes move to other sources or routes.

Transport mode selection

Example question
Our Asian imports go by sea. What would moving part of the volume to rail or air cost once the capital tied up in transit is counted?
You bringSCMotif calculatesYou get
You bring
volumes per route, and rates, transit times and capacities per mode, assumed where you do not use a mode today, plus your carrying cost rate.
SCMotif calculates
which mode each flow takes in the cheapest plan, with each mode’s rate including the cost of the stock its transit time ties up.
You get
the total cost of each mode mix compared with today, and where a mode’s capacity runs short.